Summary of Contents for Neltronics OBD-400
- Page 1 OBD-400 User manual Please read this manual carefully before attempting installation and online activation. Pictures are for indication and illustration purposes only...
-
Page 2: Packing List
Packing list Parts name quantity note OBD dongle ● USB configuration ○ cable OBDII extension cable ○ 9-Pin adapter cable ○ 6-Pin adapter cable ○ Note: ● Standard ○ Optional... -
Page 3: Product Overview
Product Overview industrial class devices for telematics，It Reads vehicle live data from ECU、GPS data and G-sensor data, Then sends these data to server by 2G/3G/4G or BLE. GPS LED GSM LED OBD LED USB interface OBD connector 1. Standard OBD Connector Connect to the 16 Pin on-board Diagnostic Link Connector (DLC). -
Page 4: Status Indicator
Status Indicator indicator status Blinking (on 0.5s, off 0.5s)—trying to access OBD OBD LED ON—successful OBD communication OFF—OBD is not available Fast blinking (on 0.5s, off 0.5s) --network searching Slow blinking (on 0.5s off 2.5s) --registered network GSM LED ON--logged into the server OFF--GSM off Blinking (on 1s, off 1s) -- GPS signal is good GPS LED... -
Page 5: Installation Instruction
Installation Instruction SIM card installation Open waterproof rubber plug. Insert the SIM card and press gently, a click will be heard upon successfully placing the SIM card in its place, please follow the insert direction marked on the SIM card cover. Device installation First, find the OBD port at vehicle: In general, the OBD port is located in the driver or passenger cabin, from the edge of dashboard... - Page 6 Then device installation: Before installing the device, please make sure device has been configured with necessary parameters including network parameters. Park the car and make sure engine is off, align the OBD connector of the device with the engine diagnostic port and simply push in place, ensuring the device is secure. If the OBD port cover cannot be closed back after device plugged in, please use OBD extension cable and mount the device in proper place.
-
Page 7: Device Configuration
Start engine the device starts OBD communication, various can be indicated by lights, or APP log information. Device Configuration PC Tool Get the USB driver(STM32 Virtual COM Port Driver(V1.3.1)) and SSCOM32 Tool from Distributor. Install the USB driver and SSCOM32 Tool on your PC. Connect device to PC through USB configuration cable, open the SSCOM32 Tool, and the device will print log automatically.