General Specifications - Mitsubishi Electric Melsec-F FX2NC Series Hardware Manual

FX2NC Series Programmable Controllers
3.3

General specifications

Table 3.3 :General Specifications
Item
Operating Temperature
Storage Temperature
Operating Humidity
storage Humidity
Vibration Resistance
- Direct Mounting
Vibration Resistance
- DIN rail Mounting
Shock Resistance
Noise Immunity
Dielectric Withstand Voltage
Insulation Resistance
Ground
Working atmosphere
Working altitude
*1 The criterion is shown in IEC61131-2.
*2 Do not use the PLC under pressure higher than the atmospheric pressure. Doing so may
damage the PLC.
0 to 55 °C (32 to 131 °F)
-20 to 70 °C (-4 to 158 °F)
35 to 85% Relative Humidity, No condensation
35 to 90% Relative Humidity, No condensation
10 - 57 Hz: 0.075 mm Half Amplitude
*1
57 - 150 Hz: 9.8 m/s
Sweep Count for X, Y, Z: 10 times (80 min in each direction)
10 - 57 Hz: 0.035 mm Half Amplitude
*1
57 - 150 Hz: 4.9 m/s
Sweep Count for X, Y, Z: 10 times (80 min in each direction)
2
147m/s Acceleration, Action Time: 11 ms
*1
3 times by half-sine pulse in each direction X, Y, and Z
1000 Vp-p, 1microsecond, 30 - 100 Hz, tested by noise simulator
500 V AC > 1 min, tested between all points, terminals and ground
5 MΩ > at 500 V DC, tested between all points, terminals and ground
Class D (100 Ω or less)
Free from corrosive or flammable gas and excessive conductive dust
*2
<2000m
Description
2
Acceleration
2
Acceleration
Installation notes 3.
3-6