How To Reset A Guest Rc To The Default Settings; How To Setup The Healthcare Rc (22Av1604B); How To Setup The Easy Rc (22Av1601B) - Philips 43HFL5114 Professional Installation Manual

Mode: Buttons combination:
Blue (default) "Home" and "Blue"
Yellow "Home" and "Yellow"
Red "Home" and "Red"
Green "Home" and "Green"
0 "Home" and "Clock"
1 "Home" and "Channels"
2 "Home" and "Arrow up"
3 "Home" and "TV"
4 "Home" and "Arrow left"
5 "Home" and "OK"
6 "Home" and "Arrow right"
7 "Home" and "Back"
8 "Home" and "Arrow down"
9 "Home" and "Mute"

2.1.4.3 How to reset a guest RC to the default settings

You can reset the guest RC to the default settings by programming the MRC "Blue" as explained in the
previous chapter.

2.1.4.4 How to setup the Healthcare RC (22AV1604B)

The RC can be used in both RC5 and RC6 mode, meaning that it can be used for all TV's. By default, the
RC is in RC6 mode (for 301x/501x/701x TV's). You can change the RC to RC5 mode (for 28x9 TV's).

You can change the RC to RC5 mode by pressing 8 seconds "Menu" and "Volume up" at the
same time.

You can change it back to RC6 mode by pressing 8 seconds "Mute" and "Channel up" at the
same time.
You can also use this RC for multi RC. More details can be found in the 'Professional settings' chapter.
You can program this RC by pressing 2 buttons at the same time for 8 seconds following the
combination from earlier chapter 'How to set the multi RC for the guest RC'.

2.1.4.5 How to setup the Easy RC (22AV1601B)

The RC can be used in both RC5 and RC6 mode, meaning that it can be used for all TV's. By default, the
RC is in RC6 mode (for 301x/501x/701x TV's). You can change the RC to RC5 mode (for 28x9 TV's).

You can change the RC to RC5 mode by pressing 5 seconds "Menu" and "Volume up" at the
same time.

You can change it back to RC6 mode by pressing 5 seconds "Mute" and "Channel up" at the
same time.
You can also use this RC for multi RC. More details can be found in the 'Professional settings' chapter.
You can program this RC by pressing 2 buttons at the same time for 5 seconds following the
combination from earlier chapter 'How to set the multi RC for the guest RC'.
- 13 -