Red 250ms Green 250ms alternates, flashing before power off.
Main program upgrade Failed:
Red 1750ms Green 250ms alternates,flashing before power off.
Notes: In the upgrade process, as timer software is used to control flashing, situations such
as LED light stuck when creating partition of flash, is normal phenomenon.
B、Power On Upgrading
STEP 1:Copy the Upgrading File (SW) to a USB disk .
STEP 2:Link USB disk to board, out AC then put on AC, the update begin and led start to
flash. The upgrade result can be seen from led's flashing speed.
STEP 3:Plug USB disk and AC out, then put on AC, upgrade finish.
38