Samsung WA45T3200A Series User Manual page 27

STEP 7 Run calibration (recommended)
Calibration ensures accurate weight detection by the washer. Make sure the tub is empty
before running calibration.
1. Press Power to turn on the washer.
2. Press and hold Temp. and Soil simultaneously for 3 seconds.
3. Press Start/Pause to start calibration.
4. The tub rotates clockwise for approximately 2 minutes.
5. When complete, "0" appears on the display, and the washer turns off automatically.
NOTE
Run Calibration Mode periodically for more accurate weight detection.
English 27