Demonstration Mode - Canon DIM-462 Instruction Manual

Confirmation/Warning beeps
The camcorder's short operation confirmation beeps are indicated by
sound upon certain camcorder operations such as when you turn the camcorder on, during the
self-timer countdown, right before the camcorder's automatic shut-off, and also upon any unusual
condition of the camcorder. Beeps are not recorded on the tape.
+
TAPE CAMERA
SYSTEM
( 20)
To turn the beep off, open the menu and select SYSTEM. Then select BEEP, set it
to OFF and close the menu.

Demonstration Mode

You can see a demonstration of the camcorder's main features. To see the demonstration, do either
of the following:
• With no cassette or memory card inserted, turn the DEMO MODE on in the CAM.MENU or
C.CAM.MENU and close the menu.
• Leave the camcorder with no cassette or memory card inserted for five minutes after turning it
on.
+
TAPE CAMERA
DISP. SET UP
( 20)
To turn the demonstration mode off, open the menu and select DISP. SET UP. Then
select DEMO MODE, set it to OFF and close the menu.
Notes:
• The opening animation will not appear when the demonstration mode is turned off.
• To cancel the demo mode once it has begun: push any button, turn off the power, load a
cassette or insert a memory card.
+ PLAY
TAPE
,
(VCR)
BEEP••• ON
+
CARD CAMERA
,
DEMO MODE••• ON
` in the illustrations. Beeps
+
CARD CAMERA
,
+ PLAY
CARD
,
(VCR)
E
39