Introduction Registration; Important Safety Instruction - LG GC-B409SLQK Owner's Manual

Registration
The model and serial number are found on
the rear ofthis unit. This number is unique
to this unit and notavailable to others.
You should record requestedinformation
here and retain this guide as a
permanent record of your purchase.
Staple your receipt here.
Date of Purchase
Dealer Purchased From
Dealer Address
Dealer Phone No.
Model No.
Serial No.

Important Safety Instruction

This is the safety alert symbol. It alerts you to
safety messages that inform you of hazards that
can kill or hurtyou or others or cause damage to
the product. All safety messages will be preceded
by the safety alert symbol and the hazard signal
word DANGER, WARNING, or CAUTION.
These words mean:
WARNING!
You can be killed or seriously injured if you
don't follow instructions.
CAUTION!
Indicates an imminently hazardous situation
which,minor or moderate injury, or product
damage only.
WARNING!
• Before it is used,this refrigerator must be
properly installed and located in accordance
with the installation instructions in this
document.
• All safety messages will identify the hazard,
tell you how to reduce the chance of injury,
and tell you what can happen if the
instructions are not followed.
• To reduce the risk of fire, electric shock, or
injury to persons when using your product,
basic safety precautions should be followed,
including the following. Read all instructions
before using this appliance.
•
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order
to avoid a hazard.
:
:
:
:
:
:
When connecting the power:
The dedicated outlet
should be used.
Using several devices at one
outlet may cause fire.
The electric leakage breaker
may damage food and the dispenser
may be leaked.
Water may be flown into or
the plugmay be damaged,
which causes fire or electric
shock.
Do not allow the power cord bent or pressed
by the heavy object to be
damaged.
It may damage the power
cord to cause fire or
electric shock.
Do not extend or modify the length of the
power plug.
It causes electric shock or fire
by the electric damage of the
power cord orothers.
Do not pull out the cord or touch the
power plug with wet hands.
It may cause electric shock
or injury.
Remove water or dust from the power plug
and insert it with the ends of the pins
securely connected.
Dust, water or unstable
connection may fire or
electric shock.
Make sure of grounding.
Consult a qualified electrician or service
person if the grounding instructions are
not completely understood, or if you have
doubts on whether the appliance is properly
grounded or not.
The incorrect grounding
may cause breakdown
and electric shock.
4
Introduction
NO
NO
Ground wire
More than
30 inches
Copper flat