Failure History; Simulation - JRC NTG-420 Operation Manual

Solid state transmitter-receiver
Hide thumbs Also See for NTG-420:
Table of Contents

Advertisement

7ZPRR002

2.4.4.3 Failure history

Failure history will be displayed for the troubleshooting.
Update Button: Update the current logging information.
All Clear Button: Clear the all logging information.
Save to file Button: Save the current logging data with file name.

2.4.4.4 Simulation

This function is to simulate the output of the message of the CDC-1469. It can not use that it has not
Open the receiving socket so to send will use the socket for reception.
Enabled: This is switch for simulation on/off.
Period: Specify the radar antenna rotation speed for the simulation.
IP Addr: Specify the output IP address. (127.0.0.1 is special IP which mean own IP address)
Port No: Specify the output port number.
Send one sweep Button: Outputs the message of one sweep data as single.
Outputs the whether Enabled check box is off.
43

Advertisement

Table of Contents
loading

Table of Contents