Select The Focus Range To Combine And Create A Single Picture ([Focus Stacking]) - Panasonic Lumix DC-TZ91 Operating Instructions Manual

Select the focus range to combine and create a single picture
([Focus Stacking])
Near
1
Touch [ ] on screen in step
([Post Focus])"
• The same operation can be performed by pressing the [Fn1] button.
2
Choose a stacking method and touch it
[Auto Merging]
[Range Merging] Combine the pictures with the selected focus position into one picture.
(When selecting [Range Merging])
3
Touch the focus point
• Select positions at two or more points.
• Focus points between the selected two positions will be
selected.
• Positions that cannot be selected, or that would produce an
unnatural result will be greyed out.
• Touch a position again to deselect it.
• If you drag the screen you can then continue to select positions.
Operation
[Fn2]
[DISP.]
[MENU/SET]
127
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Focus
2
of "Select the focus point and save the picture
(→126)
Automatically select photos suitable for stacking and combine them into one
picture.
• Choose by giving preference to near-focus pictures.
• Perform the focus stacking and save the picture.
Touch operation
Touch
Select the position
[Set/Cancel] Set/Clear the position
Select all positions (Before
[All]
selecting position)
Deselect All (After selecting
[Reset]
position)
Combine and save picture
4K Photo and Drive Settings
Distant
Description
Set/Cancel Set/Cancel
Reset Reset
Set/Cancel Set/Cancel
Reset Reset
DVQP1288