Troubleshooting - Ducati E-MOTO User Manual

TROUBLESHO OTING
WARNING!
If the problem may cause the bike to fail, the display will show error signal. On this chart,
different signal indicates different fault causes. When the bike has an error signal, please
contact the dealer for repair and provide this information to your local dealer, and DO
NOT ride the bike until the problem is solved.
The motor is overheating now.
LED-1
Please do not touch it and
leave it for at least 30 minutes
until it cools down and then
reboot the system.
The rear motor is not working.
Release the throttle and do
not ride the bike until the
LED-3
problem is solved.
LED-1
Motor hall signal error. Please
LED-2
contact authorized dealer.
LED-1
Motor or system controller
error. Please contact
authorized dealer.
LED-4
Throttle abnormal. Please
LED-2
contact authorized dealer.
LED-4
LED-1
Wrong battery. Please only
LED-2
use E2 battery on E2 bike.
LED-3
For further questions in regards of the bike, please contact your local dealer.

9. Troubleshooting

20
The system detects the
battery temperature is
abnormally high. Please stop
LED-2
using the product and leave it
for at least 30 minutes until it
cools down.
Low battery power level
warning. Please re-charge
or replace the battery
immediately.
LED-4
LED-1
Rear brake sensor error.
Please contact authorized
LED-3
dealer.
Overload current on motor
LED-2
controller error. Please contact
LED-3
authorized dealer.
Throttle abnormal. Please
contact authorized dealer.
LED-3
LED-4
LED-1
System communication
LED-2
malfunctioning, please
LED-3
contact our authorized dealer.
LED-4