Vga over cat5 extenders and extender/splitters (36 pages)
Summary of Contents for Tripp Lite NPOE-EXT-2X1G30
Page 1
Model: NPOE-EXT-2X1G30 Este manual está disponible en español en la página de Tripp Lite: tripplite.com Ce manuel est disponible en français sur le site Web de Tripp Lite : tripplite.com Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: tripplite.com Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar:...
Package Includes • NPOE-EXT-2X1G30 2-Port Gigabit PoE Extender • Wrench • (x3) Waterproof Connectors • Quick Start Guide Product Features • Supports Power over Ethernet so no external power supply is needed • Supports true 10/100/1000 Mbps data transmission and PoE power supply distance up to 330 ft.
Hardware Description Front Panel The front panel includes the PSE output port, input port and LED indicator. Left Panel The left panel includes the input port (PoE In) and grounding column with standard network Cat5e cable (line diameter 5.5 mm). Right Panel The right panel includes the output port (PoE Out), to be used with a standard network Cat5e cable.
Installation Carefully read and follow all instructions to avoid device damage and security threats that could result from incorrect installation. • The nuts of the waterproof joint should be tightened fully to the joint threads and fit level to the hexagon plane to prevent water from damaging your equipment •...
Page 5
• When power is required, the power source (e.g. midspan or PoE injector) must be installed between the Ethernet switch (non-PoE source) and the first NPOE-EXT-2X1G30 extender. • If you are installing an injector and a splitter, they each need to support 60 to 90W.
Page 6
Installation Multiple Extender Installation Notes: • You may only cascade three PoE extender units up to 1312 ft. (400 m) in a single installation. • Prior to connecting the RJ45 cable to input/output ports, install the included cable glands onto the cable. Refer to Cable Wire and Crimp Steps below.
Page 7
Installation Cable Wire and Crimp Steps Installing Cable Gland with RJ45 UTP Cable Step 1: Disassemble the cable gland as shown below: Clamping Nut Body (with washer) Step 2: Slip the Ethernet cable through the clamping nut and gland body. Tighten the clamping nut and the body to make the two parts into one complete cable gland.
Page 8
Installation Connecting Waterproof Cable Kit to the Outdoor PoE Extender Step 1: Insert the RJ45 connector into the connector of the PoE++ In Port. Step 2: Turn clockwise to tighten the gland body with the Outdoor PoE Extender. Step 3: Attach the clamping nut to the cable gland to complete the cable assembly.
Page 9
Installation Step 4: Repeat Steps 1 to 3 for two PoE+ Out Ports 21-06-161-933F47-EN.indd 9 21-06-161-933F47-EN.indd 9 8/19/2021 11:12:10 AM 8/19/2021 11:12:10 AM...
3-Year Limited Warranty Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products.
Page 12
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.