Advertisement
Quick Links
De'Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com
Proudly distributed by
De'Longhi Australia Pty Limited
P.O. BOX 4540
CASULA MALL NSW 2170
Customer Service Ph: 1800 126 659
Fax: 1800 706932
www.delonghi.com.au
e-mail: delonghi@delonghi.com.au
De'Longhi New Zealand Limited
99 Khyber Pass Road
Grafton 1023
Auckland, New Zealand
P.O. Box 58-056 Botany
MANUKAU 2163
Customer Service Ph: 0508 200 300
Fax: 0508 200 301
www.delonghi.co.nz
e-mail: delonghi@delonghi.co.nz
Advertisement
Related Manuals for DeLonghi HCM Series
Summary of Contents for DeLonghi HCM Series
- Page 1 De’Longhi New Zealand Limited 99 Khyber Pass Road Grafton 1023 Auckland, New Zealand P.O. Box 58-056 Botany MANUKAU 2163 Customer Service Ph: 0508 200 300 Fax: 0508 200 301 www.delonghi.co.nz e-mail: delonghi@delonghi.co.nz De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com...
- Page 2 HCM Series ELECTRIC CONVECTOR HEATER Instructions for use...
- Page 3 Fig. 1 Fig. 2 Fig. 3...
-
Page 4: Important Warnings
pools. IMPORTANT WARNINGS - If you intend to fix your appliance to the Safety warnings wall, make sure that the switch or other control devices are not within reach of Danger! Failure to observe the warning may result in life threatening in- persons in the bath or shower. -
Page 5: Attaching The Feet
Only use the heater in an upright position. if the heater is in prolonged use, if you are in any doubt please The heater must be positioned at least 30cm from furniture consult an electrician. or other objects. INTRODUCTION The first time you use the appliance, operate it of at least 15 minutes with the thermostat at maximum to eliminate the Thank you for choosing a De’Longhi product. -
Page 6: Maintenance
The kit to wall mount your convector heater contains: button in position “II” only = medium power buttons in both positions “I” and “II” = maximum power 2 top brackets Adjusting the thermostat 2 bottom brackets When the room has reached the desired temperature, turn the thermostat knob slowly in an anti-clockwise direction until you get to the setting —...