Download Print this page
ADTRAN 411 Quick Start

ADTRAN 411 Quick Start

Micro ont 1 pots + 1 gige

Advertisement

Quick Links

Quick Start
D
ESCRIPTION
This document supports the following ONTs:
Part Number
Description
1287787F1
ADTRAN 411 Micro ONT (NA)
1287787F4
ADTRAN 411 Micro ONT (AUS)
The ADTRAN 411 1 Pots + 1GigE (Micro ONT) is an Optical
Network Terminal (ONT).
Figure 1
the Micro ONT.
1
5
6
7
Figure 1. Micro ONT Key Features
The table opposite provides descriptions for each feature number
above.
ADTRAN 411
Micro ONT
1 POTS + 1 GigE
illustrates the key features on
VOICE
LAN
FIBER
POWER
4
2
3
PWR
PWR
VOICE
VOICE
LAN
LAN
8
Number
Feature
1
Single GPON fiber interface with 1.244 Gbps upstream
and 2.488 Gbps downstream
2
POTS (Voice) Interface
3
10/100/1000-BaseT Ethernet Interface (LAN)
4
AC Power Adapter
5
UPS Power/Alarm connector
6
Status LEDs
7
Reset Button
8
Keyholes
Fiber (FIBER)
Fiber is supplied to the Micro ONT using an SC/APC Fiber
connection located on the rear of the unit.
Ethernet Interface (LAN)
The Micro ONT supports data service through one 10/100/
1000BASE-T Ethernet interface via an RJ-45-style connector.
POTS (VOICE)
Plain Old Telephone Service (POTS) uses in-band signaling tones
and currents to determine call status (for example, call request).
Because POTS allows for the transfer of audio signals below 3.3
kHz, POTS systems are also used for modems that allow data
transmission (referred to as dial up connections).
AC Power
The power feed is +12 VDC from the included AC to DC Adapter.
The adapter plugs into the PWR connector.
UPS
The Micro ONT provides an optional connection for an uninterpre-
table power source (UPS). An UPS is a battery backup system
designed to continue providing power when the primary power
source is lost. Power is supplied to the Micro ONT by a local
power source with battery backup that utilizes the AC power at the
customer premises to charge the battery.
ONT Reset (RESET)
Refer to
Figure 1
for the location of the Reset button.
Reset the Micro ONT if you need to reboot the unit. The RESET
button is accessed through an opening on the bottom of the unit.
To reset the Micro ONT, insert a small pin (paper clip) into the
RESET opening and hold the button down for 10 seconds.
The Micro ONT will automatically download the latest provisioning
after the reset process has completed.
August 2020
61287787F1-13A

Advertisement

loading

Summary of Contents for ADTRAN 411

  • Page 1 10/100/1000-BaseT Ethernet Interface (LAN) 1287787F4 ADTRAN 411 Micro ONT (AUS) AC Power Adapter UPS Power/Alarm connector The ADTRAN 411 1 Pots + 1GigE (Micro ONT) is an Optical Status LEDs Network Terminal (ONT). Figure 1 illustrates the key features on Reset Button the Micro ONT.
  • Page 2 Pan Head screws. has occurred during shipping, file a claim with the carrier and then contact ADTRAN. For more information, refer to the warranty. Desktop Installation The Micro ONT can be located on a desktop. Ensure the Micro...
  • Page 3 Figure 5 Slow state complete the following steps: 1. If using the ADTRAN Cable Assembly (see Note below), connect one end to the Molex Connector and the other to ROUBLESHOOTING the UPS. This immediately turns the unit ON. The following table provides troubleshooting tips.
  • Page 4 For inquiries, go to: Warranty: ADTRAN will replace or repair this product within the warranty period if it does not ADTRAN CUSTOMER CARE: meet its published specifications or fails while in service. Warranty information can be From within the U.S.

This manual is also suitable for:

1287787f11287787f4