Operation Procedure - Daewoo KQG-8A6K5S40 Owner's Manual

OPERATION PROCEDURE

This section includes useful information about oven operation.
1
Plug power supply cord into AC 230V / 50Hz
power outlet.
2 After placing the food in a suitable container,
open the oven door and put it on the glass tray.
The glass tray and roller guide must always be
in place during cooking.
3
Close the door. Make sure that it is firmly closed.
When the oven door is closed, the light turns off.
4
The oven door can be opened at any time during
operation by pushing the door open button.
The oven will automatically shut off. To restart
the oven, close the door and then push the
START button.
5
The oven automatically cooks on full power
unless set to a lower power level.
6
The display will show " : 0" when the oven is
plugged in.
WATTAGE OUTPUT CHART
• The power-level is set by pressing the POWER pad. The chart shows the display, the power level and
the percentage of power.
Touch POWER pad
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
7
Time clock returns to the present time when the
cooking time ends.
8
When the STOP/CLEAR button is pushed during
the oven operation, the oven stops cooking and
all information retained. To erase all
information(except the present time), push the
STOP/CLEAR button once more. If the oven door
is opened during the oven operation, all
information is retained.
9
If the START button is pushed and the oven does
not operate, check the area between the door and
door seal for obstructions and make sure the door
is closed securely. The oven will not start cooking
until the door is completely closed or the program
has been reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Power level (Display)
P-HI
P-90
P-80
P-70
P-60
P-50
P-40
P-30
P-20
P-10
P-00
9
Approximate Percentage of Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%