Philips 40PFA4509 User Manual page 13

• [Sleep Timer]: Sets the duration the
TV remains idle before it automatically
enters standby mode. Adjust
the time with the sleep button
on the remote control.
Off/10/20/30/60/90/120/180 minutes.
(Does not apply in PC mode).
• [Power On Status]: Sets the TV's status
when it is connected to an AC power
supply.
• [Time Setup]: Sets the system time.
• [Freeze Switch]: Sets the channel
freeze switch mode. (Only displayed in
TV mode)
• [TTX Language]: Sets the TTX
language (Can only be used in TV
mode).
• [Color System]: Sets the AV color
system. (Only displayed in AV mode)
• [HDMI]: Sets the HDMI mode. (Only
displayed in 480p/576p/720p/1080p
HDMI modes.)
• [Reset]: Restores the default setup.
(Excluding password setup and channel
information)
Changing picture format
1
Press ADJUST and select [Setup].
2
Press Select [Picture Format].
3
Select a picture format.
4
Press OK to confirm.
Options:
Summary of picture formats
Configuration of the picture setup listed below.
Notes
•
Some picture setups may be unavailable due to
differences between picture signal formats.
[16:9]: Change the normal
ratio to widescreen format.
[4:3]: The normal format.
[Zoom 1]: Horizontal
scaling of the widescreen
picture format. When this
format is used, the two
edges of the picture frame
will be partly cut off.
[Zoom 2]: Set the normal
ratio to widescreen format.
(PC mode only has options
for normal, widescreen and
Point to Point).
[Point to Point]: Used for
HDMI connections on PCs.
Will display the PC's full
screen in order to achieve
the best display effect.
EN
11