GE AEW06 Owner's Manual And Installation Instructions page 10

PREPARE THE AIR CONDITIONER
3
(cont.)
Slide the left and right accordion panels into
C
the top and bottom mounting rails. Be sure to
leave enough space to slip the top and bottom
of the frame into the rails on the cabinet.
NOTE: There is a right and left accordion panel.
Be sure to use the proper panel for each side.
Slide the left and right accordion panels into
D
the top and bottom mounting rails.
Top mounting rail
Top left
Bottom mounting rail
PREPARE THE WINDOW
4
Cut the window sash seal to the proper length.
Peel off the backing and attach the seal to the
underside of the window sash.
Installation Instructions
Top right
10
INSTALL THE AIR CONDITIONER IN
6
THE WINDOW
Place the air conditioner on the sill with the
A
bottom mounting rail against its back edge.
Center it and close the window securely behind
the top mounting rail. It should be level or
slightly tilted to the outside. Use a level; about
a 1/3 bubble will be the correct case slant to the
outside.
or
Extend the left and right accordion panels to
B
the vertical window sashes and attach 3 screws
through the holes in the upper panels, as
appropriate.
INSTALL SUPPORT BRACKET AND
7
FOAM TOP WINDOW GASKET
CAUTION:
A
To prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the window locking
bracket to the window
side jamb with one screw.
Cut the foam top window gasket to the window
B
width.
Stuff the foam
C
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
or
Type B Screws
Vinyl
Wood