Color imagination SI-031 User Manual

1 1 1 1 1 1 1 1 . . . . Maintenance Maintenance Maintenance and Maintenance and and and Cleaning Cleaning Cleaning Cleaning
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly connected and must not be
corroded.
2) There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling,
suspension, trussing).
3）Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.
4）The electric power supply cables must not show any damage, material fatigue or sediments.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer
and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a regular cleaning to the
lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation
of dust.
2) Clean the fan each week.
3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit
contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or
solvents.
There are no serviceable parts inside the device. Please refer to the instructions under "Installation
instructions".
Should you need any spare parts, please order genuine parts from your local dealer.
5 5 5 5 0W 0W LED Beam Moving
0W LED 0W LED Beam LED Beam Beam Moving Moving Moving Head
SI-0 SI-0 SI-0 SI-031 31 31 31
User User Manual Manual
User User Manual Manual
KEEP KEEP KEEP THIS KEEP THIS THIS THIS MANUAL MANUAL MANUAL MANUAL FOR FOR FUTURE FOR FOR
Head
Head Head
FUTURE NEEDS FUTURE FUTURE NEEDS NEEDS NEEDS