Test Port Match; Specifications; Description - HP 85027A Operating And Service Manual

TEST PORT MATCH

Specifications

The test poi-t match specifications are incorporated in Table 4-2, Test Port Match
Performance Test Record, below.

Description

Using a typical reflection measurement setup, as shown in Figure 4-4, a second
directional bi-idge is used to measure the TEST PORT of the bridge under test. The
bridge under test must be biased by the HP 8757A and its RF IN PORT must be
properly terminated.
Figure 4-4. Test Port Match Performance Test Setup
HP 85027A/B/C Performance Tests
4-7