Sony HT-RT3 Service Manual page 36

HT-RT3
REVISION HISTORY
Ver. Date
1.0 2016.03 New
1.1 2016.06 Addition of Argentina, Latin-American and Singapore models.
Add Abbreviation for E12 in page 13.
Add IC Pin Function Description of IC4001 in page 29.
Change description of MANUAL, INSTRUCTION for US and Canadian models in ACCESSORIES
section.
Change P/N of POWER-SUPPLY CORD for AEP model in page 32 and page 34.
Change P/N of Ref. No. 10 in page 34.
Change P/N and description of Ref. No. for TB6001 in SPEAKER CHUKEI PC BOAR board.
Delete of CN2008 and S2000 in MAIN board.
Delete of duplicate WIRE (FLAT TYPE) (6 CORE) in page 30 and 34.
1.2 2016.08 Add "
Change of MAIN board (Suffi x 12,13).
Change of IC2009 and IC3205 to complete MAIN board in page 18.
Change of IC2009 in MAIN board to IC2003 (MAIN board Suffi x-12) and IC2009 (MAIN
board Suffi x-13) in page 20 and 21.
Change of Ref. No. IC1000 to IC1002 in page 20.
Change of Ref. No. IC1002 to IC1000 in page 20.
Change quantity of AC plug adaptor (LA9) in SPECIFICATIONS and ACCESSORIES sections.
1.3 2017.02 Add note of "NOTE OF REPLACING BLUETOOTH MODULE OR RC-S730 (WW)" in page 5, 30, 31
and 34.
Add P/N and description of L3207 on MAIN board in page 33.
Add P/N and description of C5008 on OLED CHUKEI PC BOAR board in page 33.
Add troubleshooting fl ow (6. Display panel is not functioned) in page 18.
Change P/N of Ref. No. 10 in page 30 and 34.
1.4 2017.07 Correction of TROUBLESHOOTING
1.5 2017.09 Addition of Part No. for Ref. No. IC2003, IC2005, IC2009, IC3001 and IC3204 on MAIN board
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input ">001Z" in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
" mark for Ref. No. 504 in ACCESSORIES section.
0
, follow the procedure below.
Description of Revision
(SMR-17020)
(SMR-17027)