Pantry; Crisper Humidity Control - LG LFC20770SB Owner's Manual

Sliding Shelves (in some models)
You can slide some of the shelves in your refrigerator
towards inside or outside like explained below.
• To slide the shelf towards the outside: Pull towards you,
figure A.
• To slide the shelf towards the inside: Push until it stops,
figure B.
Figure A
In order to remove a shelf from a metal frame
• Pull the shelf until it stops.
• Incline the front of the shelf towards the top and pull
forward.
• Lift the shelf in the manner it moves across the
support openings.
To put back into place just reverse these steps.
Functional Shelves (Folding Shelves, in some models)
You can store tall articles like gallons or bottles just by
simply folding the shelf in half.
PANTRY (in some models)
For storage of meat or fresh food. Adjust the control to
desired temperature by moving from COLD to COLDER.
Pull forward to open. Lift slightly and pull it out to remove.
l
MFL67241801_1.indd 17
USING YOUR REFRIGERATOR
CRISPER HUMIDITY CONTROL (in some models)
You can control the amount of humidity in the moisture
-sealed crispers. Adjust the control to any setting between
HIGH and LOW.
• "High": keeps moist air in the crisper for best storage
of vegetables.
• "Low": lets moist air out of the crisper for best storage
of fruits.
Figure B
To remove the crisper:
• Slide crisper straight out to the stop.
• Lift the front of the crisper, then pull it out to remove
• Replace the crisper by sliding it back in fully past the
drawer stop.
To remove the glass:
• Lift up the glass after inserting a screwdriver under the
crisper cover.
• Pull glass cover up and out.
To remove the crisper cover support:
NOTE: Remove glass before removing the crisper cover
support.
• While holding the crisper cover support with both
hands (as shown in the image below). Pull forward and
slightly lift the front part.
17
I I
I
I
CAUTION:
Be careful when you handle the glass
cover because it could loose.
I I
I
6/9/2011 12:32:15 PM