NAD VISO HP30BT Owner's Manual page 4

IDENTIFICATION OF PARTS AND ACCESSORIES
1 STANDARD HEADPHONE RIBBON CABLE
•
For a complete listening experience on most devices, use the
standard headphone ribbon cable. Plug the "L" (left) end of the cable
into the corresponding input at the bottom of "L" (left) ear pad and
"R" (right) end of the cable into the corresponding input at the
bottom of the "R" (right) ear pad. Connect the other end into the
1/8" (3.5mm) stereo socket on your music player.
•
A 1/4" (6.3mm) adaptor is also included for connecting to other
audio equipment.
NOTES
• Grasp the plug at the end of the cable and pull to disconnect. Never
pull on the headphone cable to disconnect the headphones from the
music player.
• Turn the volume down to a comfortable listening level on your music
player before putting on VISO HP30.
• Each swiveling arm of the VISO HP30 headband has "L" and "R" mark
indicating the left and right sides respectively of the headphones.
IMPORTANT CONNECTION OF THE HEADPHONE RIBBON CABLE
TO CORRESPONDING EAR PAD*
L
HEADPHONE
CABLE
L
R
2 HEADPHONE ADAPTOR (3.5 mm to ¼ inch)
•
Use this headphone adaptor to connect your 1/8 inch (3.5mm)
stereo plug to a 1/4 inch (6.3mm) stereo jack.
4
EAR PAD
AUDIO OUTPUT
L R
L L : R R =
L R : R L =
3 AIRLINE ADAPTOR
•
Use the supplied dual 3.5mm airline adaptor to connect your VISO
HP30 with in-flight entertainment systems.
NOTES
• Audio output jack configurations may vary on airplanes.
Airline audio may not equal the high quality sound heard from your
home audio equipment, or a portable source.
• NAD Electronics does not recommend using these headphones
as aviation communication equipment as they are not engineered
for many environmental conditions common in commercial
or non-commercial aircrafts (including, but not limited to: altitude,
temperature, noise conditions, unpressurized aircraft, etc.) resulting
in possible interference to critical communications.
4 INLINE MICROPHONE/REMOTE CABLE
•
VISO HP30 includes an inline microphone and remote cable for use
with iPod and other iOS devices. The cable is equipped with a call
answer button and other phone features for effortless switching
between music listening and talking. It also features music and
video playback control for iPod®, iPhone® and iPad®.
•
Audio is supported on all iPod models. The remote is supported by
iPod Shuffle (3rd generation and later).
•
The remote and microphone are supported only by
• iPod nano (4th generation and later)
• iPod Classic (120GB, 160GB)
• iPod Touch (2nd generation and later)
• iPhone (3G and later)
• iPad (3rd generation and later)
• iPad mini (1st generation and later)
• iPad Air, iPad Air 2
•
Plug the "L" (left) end of the cable into the corresponding input at
the bottom of "L" (left) ear pad and "R" (right) end of the cable into
the corresponding input at the bottom of the "R" (right) ear pad.
Connect the other end into the 1/8" (3.5mm) stereo socket on your
music player.