Web Configuration - Tripp Lite NGI-S05C2POE4 Owner's Manual

4.3.1.2. Web Configuration

Parameter Description
PoE Configuration Settings
Selects Enable to enable the PoE function on the Switch.
State
Selects Disable to disable the PoE function on the Switch.
Total PoE power budget of the device can be configured Max Power
Total Power
Limit Range is 240 (W).
Total Power (P) = Current of adaptor (I) * Voltage of adaptor (V)
Port Select a port or a range of ports which to configure loop detection.
Selects Enable to enable the PoE function on the specific port.
State
Selects Disable to disable the PoE function on the specific port.
LLDP Alloc
PoE Power is allocated by LLDP MED.
Priority
Selects Critical / High / Low priority for the specific port.
Interface wise PoE power budget can be configured with respect to
Max Power Limit
requirement Maximum Power Limit Range is 30W.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
PoE Configuration Status
State
Displays the current PoE mode.
26