Using Keystone
Function
Use this function when the screen is
not at a right angle to the projector
and the image is a trapezoid shape.
Only use the Keystone function
when you can't get the best angle by
moving the projector.
•Keystone
0
◀
-
1
Press Key'sꔌ, Key'sꔍ to adjust the
screen condition as you want.
2
When you are finished, press EXIT.
Keystone can be adjusted from
-40 to 40.
Using the Input List
Using the Input List
1
Press INPUT to access the input
sources.
- The connected device displays on
each input sources, only TV and
AV input are always active.
Input List
TV
AV
RGB-PC
2
Selecting an input signal with the
INPUT button will only change the
projector only to connected inputs.
Press the Navigation buttons to
scroll to any inputs.
▶
+
ꔉ OK
ꔂ Move ꔉ OK
USB
Component
HDMI
Input Label
ꕉ
Exit
WATCHING PROJECTOR
Adding an Input Label
Add a label to an input source so
that you can easily identify a device
connected to each input source.
Input Label
◀
AV
◀
Component
◀
RGB-PC
HDMI
◀
Close
1
Press INPUT to access the input
sources.
2
Press the Blue.
3
Press the Navigation buttons to
scroll to one of the input sources.
4
Press the Navigation buttons to
scroll to one of the input labels.
5
When you are finished, press EXIT.
25
▶
▶
▶
▶