Table of Contents
Advertisement
4.
Use plastic putty knife to release 6 snaps on the bottom side as Fig.11.
5.
Disconnect the cable of Key board as Fig.12.
Step 3. Remove the Rear cover.
1.
Remove the 5 screws as Fig.13
2.
Disconnect the 1 cable of USB board as Fig.14
Step 4. Remove the shield .,
scaler board , power board and USB board.
Mechanical Instruction
1.
2.
Fig.11
Step 5. Remove the main frame.
Remove the 4 screws as Fig.17.
Fig.12
Fig.13
Fig.14
Fig.15
Remove the 5 screws to remove the shield as Fig.15.
Remove the 6 screws and disconnect 8 calbe to remove the scaler
board , power board and USB board as Fig.16.
Insulation material
HUDSON 8
13
Fig.16
Fig.17
Fig.18
Fig.19
Advertisement
Table of Contents
