Weslo Cadence CT 4.8 User Manual page 7

1. Make sure that the power cord is unplugged.
Attach the six Base Feet (86) to the bottom of
the Base (87) with six M4.2 x 18mm Screws (7).
2. Have a second person hold the Base (87) in the
position shown.
Identify the Right Handrail (81), which has a large
hole near the lower end. Hold the Right
Handrail so the bend is in the position
shown. Attach the Right Handrail to the Base
(87) with two M10 x 58mm Bolts (4), two M10
Washers (12), and two M10 Jam Nuts (14). Do
not tighten the Bolts yet.
Attach the Left Handrail (80) to the Base (87)
in the same way.
3. Remove the two Bolts (A) and Wood Plates (B).
Discard the Bolts and Wood Plates.
All manuals and user guides at all-guides.com
7
1
7
86
7
86
2
80
87
4
12
4
14
3
A
87
7
86
7
86
7
86
Bend
81
Large
Hole
B
B
A