Functions - Breville 3X Bluicer Pro Instruction Book

Functions

GETTING STARTED
The ON | OFF button powers the unit into
READY mode (red light blinking).
PRESET PROGRAMS
BLENDING
The appliance has 5 preset functions:
GREEN SMOOTHIE, SMOOTHIE , PULSE/
ICE CRUSH, AUTO CLEAN and FROZEN
COCKTAIL. These pre-programmed cycles
automatically adjust the blending time and
speeds to optimize blending results. These
programs are only activated when your
appliance is in blender set up. They can't
be used when your appliance is set up in
juicing configuration.
Select the required function by pressing the
corresponding function button. The unit will
start to operate, and the selected function
button will illuminate. The timer will
start to count down and program will end
automatically when it reaches '0:00'.
The program and timer can be paused
by pressing the pause button. Resume by
pressing program button again, or cancel by
pressing pause again.
The program can also be canceled at any
time by pressing the ON|OFF button.
BJB815_USCM_IB_E20.indb 11 BJB815_USCM_IB_E20.indb 11
Turning the speed dial will interrupt the
program, placing the blender in manual
mode starting from Speed 1.
GREEN SMOOTHIE
For blending whole fruits/vegetables into
a smooth beverage. A combination of high-
speed profiles breaks down tough fibers into
very fine particles.
SMOOTHIE
For dairy-based smoothies a combination of
speeds and pulses are designed to combine
and aerate ingredients into a smooth and
creamy texture.
PULSE / ICE CRUSH
A program of continuous pulsing designed
to chop food into an even consistency or
crush ice cubes. Use the PULSE button when
the food that is being processed is too thick
or coarse to circulate within the blender jug.
The maximum amount of ice cubes the
blender can blend without liquid in the jug
at any one time is 10 standard ice cubes or
approx. 10 ounces (280g).
11
25/9/20 2:28 pm 25/9/20 2:28 pm