Lan Bypass - Asus Aaeon FWS-7821 User Manual

C.2

LAN Bypass

Table1: LAN Kit ID Select
LAN_ID2
0
0
0
0
1
1
Table2: LAN Bypass register table
Function
LAN_ID3
LAN_ID2
LAN_ID1
LAN_ID0
PWR_ON
PWR_OFF
WDT_EN
ACT_EN
Appendix C – Standard Firewall Platform Setting
LAN_ID1
0
0
1
1
0
0
Use for selecting which LAN kit will be
configured, refert to Table 1 of ID Select
table of LAN kit.
They should be set before ACT_EN.
Use for configuring LAN Bypass function
behavior to LAN kit, when system power
on.
1: Bypass
0: Pass Through
Use for configuring LAN Bypass function
behavior to LAN kit, when system power
off.
1: Bypass
0: Pass Through
Use for configuring WDT function
behavior to LAN kit, when WDT triggered.
0: Normal WDT reset (Default)
1: Force Bypass
Use for activating programming of LAN
kit. It is edge triggering (falling edge 1 to
0) and should be set to high(1) as its
normal state.
LAN_ID0 LAN kit selected
0 LAN Kit 1 Selected
1 LAN Kit 2 Selected
0 LAN Kit 3 Selected
1 LAN Kit 4 Selected
0 LAN Kit 5 Selected
1 LAN Kit 6 Selected
Description
119