GoPro HERO10 Black Manual page 58

Hide thumbs Also See for HERO10 Black:
Table of Contents

Advertisement

Mounting Your GoPro
USING THE ADHESIVE MOUNTS
Follow these guidelines when attaching adhesive mounts to helmets,
vehicles, and gear:
• Attach mounts at least 24 hours before you use them.
• Only attach the mounts to smooth surfaces. They won't stick
properly to porous or textured surfaces.
• Firmly press mounts into place. Be sure the adhesive is in full contact
with the surface.
• Only use on clean, dry surfaces. Wax, oil, dirt, or other debris will
weaken the bond, and you could lose your camera.
• Attach mounts in dry, room-temperature conditions. They won't stick
properly in cold or damp environments or on cold or damp surfaces.
• Check state and local regulations and laws to ensure that attaching
a camera to equipment (such as hunting gear) is permitted. Always
comply with regulations that restrict the use of consumer electronics
or cameras.
WARNING: To avoid injury, do not use a tether when mounting
your camera on a helmet. Do not mount the camera directly
on skis or snowboards.
For more information about mounts, visit gopro.com.
114
Mounting Your GoPro
WARNING: Always use a helmet that meets applicable safety
standards if you're using a GoPro helmet mount or strap.
Choose the right helmet for your sport or activity, and make
sure that it's the right size and fit for you. Check to see that
your helmet's in good condition, and always follow the
manufacturer's instructions on safe use.
Replace any helmet that's been subjected to a major impact.
No helmet can protect against injury in every accident.
Be safe.
USING YOUR GOPRO IN + AROUND WATER
Your GoPro is waterproof to 33ft (10m) with the door locked. You won't
need an additional housing before diving in.
The touch screen was designed to work when wet, but you may need
to wipe it off if it has trouble sensing your commands. Although it will
not work under water, you can use the camera's buttons to navigate
the menus when you're submerged. To learn more, see
the Buttons (page
26).
PRO TIP: Use a camera tether and a Floaty (sold separately) to keep
your camera afloat in case it detaches from the mount.
To capture extreme adventures down to 196ft (60m), pick up the
Protective Housing (HERO10 Black), sold separately.
For more information on Camera Tethers, Floaty, and the Protective
Housing, visit gopro.com.
Navigating with
115

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cpkg1

Table of Contents