Page 1
To whom it may concern MERIDIAN TECHNOLOGIES INC PRODUCTS IN AUSTRALIA Messrs Meridian Technologies Inc of Elmont NY, United States of America, design and manufacture at their headquarters in Elmont (near New York) an extensive range of quality equipment for use in fibre optic networks for broadcasting, CCTV, and industrial automation.
Page 2
SERIES 2300M Data Multidrop Self-Healing Optical Ring Modem DATA DATA DATA DATA DATA DATA DATA DATA FEATURES: DESCRIPTION: The 2300M is a state of the art self healing, counter rotating multi-drop data • Network Diagnostics - Local and Remote Access modem designed to provide the user with trouble free data transmission in both ring and string configurations.
Page 3
* Distance is limited to fiber loss and splices ** Higher output lasers available Meridian Technologies Inc. 700 Elmont Road. •Elmont, NY 11003 • 516. 285. 1000 • FAX 516. 285. 6300 • E-mail sales@meridian-tech.com Visit our web side: www.meridian-tech.com or www.meridian-tech.tv...
Page 4
PX-2300R modems as well as Meridian’s PX-2300M, surface- mount Multidrop modem. The 2300R can be installed in all of • Hot Swappable Input Power Meridian’s card chassis, desk chassis and 19” racking frames. These systems can be made a standalone system by using the •...
Page 5
(dBm) Multimode (SLED) 62.5/125 1300 Singlemode (Laser) 9/125 ST,FC 1310 Meridian Technologies Inc. 700 Elmont Road. •Elmont, NY 11003 • 516. 285. 1000 • FAX 516. 285. 6300 • E-mail sales@meridian-tech.com Visit our web side: www.meridian-tech.com or www.meridian-tech.tv ver 08/03...
RS-232 interface to a computer. Access to the diagnostic information on the PX-2300R is available via the USB or RS-232 interface to Meridian’s SpectraSmart software that resides on a standard computer. The modems regenerate fiber optic signals and provide greater system loss budgets (and increased distance).
Page 9
Since the customer’s data is asynchronous, and not guaranteed to be present at all times, Meridian uses its proprietary network control/diagnostic signals to continuously monitor the network’s integrity in both directions and provide network performance and fault location information back to the system controller.
Page 10
Typical Self-Healing Ring (SHR) Configuration As shown above, the Meridian PX2300 series digital fiber optic data modems can be easily configured into string or ring networks. Key factors in their networking and expansion capabilities include the ability to drop, add or repeat channels at any modem without signal degradation. Commonly referred to as a “...
Self-healing ring Self-healing ring with One Master Figure 2-2 above illustrates how the SHR ring provides signal protection. A fiber break is shown on the primary ring (‘A’) between Slave #1 & Slave #2. The master detects the broken fiber ring and ‘listens’ to the network on the secondary ring.
Using Meridian’s SHR diagnostic system, the status and integrity of both master modems, each of the slaves, and the entire fiber network will be monitored and reported back to each of the modems and to the control center – a feature unique to Meridian. DESCRIPTION OF THE EXTERNAL CONTROL PX-2300M –...
Function Description 1. Button 2 - button for submenu scrolling 2. Button 1 - button for main menu scrolling 3. Connector RJ45 - RS-232/485 interface for SpectraSmart PC diagnostic 4. Connector USB “B” - USB interface for SpectraSmart PC diagnostic 5.
The 12-position DIP switch is located on the right side of the front panel. The data format is selected by setting DIP switches 4 through 8. The available data formats are RS-232, RS-422, RS-485 (2-wire or 4-wire) and TTL. The local audible alarm can be enabled/disabled by setting switch 11. Anti-Streaming is enabled &...
Rear connectors Rear side of the PX2300M Input Data is connected to the modem via the DB-25 connector (DATA I/O) on the rear of the modem. Connections should be made following the information in Tables 1 and 4 . The modem is equipped with dual power inputs (PWR A and PWR B).
LCD contrast potentiometer (PX-2300M only) The contrast of the LCD display can be adjusted by the potentiometer located on the left side near button #1. It is accessible through the hole on the left side of the modem. INSTALLATION Following these instructions, the installation of the PX-2300 relatively simple and requires no adjustments and a minimal amount of switch settings.
Power supply The PX-2300M, surface mount modems are equipped with dual inputs that will accept 12-24V AC or DC. The primary power source is connected to the ‘PWR A’ connector. Where available, a redundant power source can be connected to the ‘PWR B’ input connector. Please note that the input voltage of the redundant power source must be equal to or less than the voltage of the primary voltage source.
Tester PX-2300M PX-2300M PX-2300M RLOOP RLOOP LLOOP TxA RxB Ring B Ring A Fig. 6-1 Loop Back Operation Onboard SpectraSmart Network Local Diagnostics The PX-2300M modem is equipped with built in self-diagnostics that are accessed through the LCD display and the two small push buttons on the top face of the module. These buttons are used for scrolling through the menu functions of the LCD display (PX-2300M).
PX-2300R Rack Mount Modem The PX-2300R is the rack mount version of the PX-2300M surface mount module and is functionally equivalent to the PX-2300M with the exception of the LCD display. Access to the network diagnostics on the PX-2300R is via the RS-232 or USB interfaces to a computer running SpectraSmart NMS. Fig.
Page 23
See Sections 3 & 4 for LED indicator status, DIP & rotary switches and jumpers settings. Jumper 1, 2 Jumper 13–24 Jumper 3–12 Rotary switches Jumper 25–28 Fig.7-2 PX-2300R Side View PX-2300R modem has front-panel mounted RJ45 and USB for connection to the computer for SpectraSmart diagnostics and an RJ45 connector for the RS-485 interface to other PX-2300R modems.
Page 24
If the PX-2300R is inserted in a Meridian diagnostic subrack (SR-2000/S1-PC) with communication and interface cards, it is necessary to connect Cable #3 between the RS-485 (RJ45) port on the PX-2300R and the communication card (RJ11) on the SpectraSmart chassis. SpectraSmart will then discover and...
PX-2300R Jumper Setting: The function of the jumpers in the PX-2300R as identified in Figure 7-2 are identical to the jumpers on the PX-2300M surface mount modem. Refer to Section 4.0 for more information regarding the jumper settings. They are the same as in the PX- 2300M module, with the exception of Jumpers 1 &...
SpectraSmart PC Network Management System The PX-2300 multidrop modems are SpectraSmart compatible for remote diagnostic network management of the associated strings & rings. Using the RS-232 or USB ports, SpectraSmart collects real-time data from the network modems, fiber connectivity, modem operational status, etc and presents it on the computer in a GUI format for easy network viewing and network fault identification.
Page 27
SpectraSmart PC has two options for starting the software: Automatic and Manual. In the Automatic mode the system automatically detects the number of slaves on the network.. The detection process starts after entering the user password. Once detected, the message “System detected N Multidrop LANs with M slaves”.
- Check DIP switch position (interface mode, loop) If the problem with the modem/network still persists, please call Meridian’s technical support staff for further assistance. When calling, please have the information about the modems and network (part #, Serial #, network architecture, etc.) available.
10.0 SPECIFICATIONS Data Rates Asynchronous ………………… DC - to 115 Kbps Optical Transmitter……………………… LED/Laser Receiver ……………………… PIN Diode Wavelength …………………… 850 or 1300 (MM) 1310 or 1550 (SM) Fiber Optic Connectors ……… ST (MM) FC/ST (SM) Loss Budget …………………… 15 dB (MM), 30 dB (SM) Electrical Data Connector ………………...
The shipping expense to Meridian Technologies , Inc. should be prepaid. The product should be properly packed and insured . After repairs have been completed, Meridian Technologies, Inc. will ship the product back to the Buyer at Seller’s expense. 700 Elmont Road, Elmont, NY 11003 Tel.: 516-285-1000;...
Page 33
RJ45 Serial Port RS – 232 PX-2300M for Diagnostic – Pin Configuration / FRONT VIEW - LEFT SIDE – PIN 1 / Description IN NO RX ( IN) RECEIVE DATA FROM PC TRANSMIT DATA TO PC TX ( OUT) DATA SET READY DSR (IN) GROUND Table 2...
Page 34
RJ45 Serial Port RS – 232 PX-2300R for Diagnostic – Pin Configuration / FRONT VIEW - LEFT SIDE – PIN 1 / Description IN NO RS-485 XMT+ (OUT) (IN) RS-232 RS-232 (OUT) RS-232 DSR (IN) GROUND RS-485 XMT- (OUT ) RS-485 RCV- (IN) RS-485...
Page 35
Master Data Slave Data Slave Data Slave Data Master # 0 Slave # 1 Slave # 2 Slave # N… TxB RxA TxA RxB TxB RxA TxA RxB TxB RxA TxA RxB TxB RxA TxA RxB String B String A Fig.
Page 36
Master Data Slave Data Slave Data Slave Data Master # 0 Slave # 1 Slave # 2 Slave # N… TxB RxA TxA RxB TxB RxA TxA RxB TxB RxA TxA RxB TxB RxA TxA RxB Ring B Ring A Ring A Ring B Fig.
Page 37
Master Data Master Data Slave Data Slave Primary Secondary Slave # 1 Slave # N… Master # 0 Master # 0 TxB RxA TxA RxB TxB RxA TxA RxB TxB RxA TxA RxB TxB RxA TxA RxB Ring B Ring A Ring A Ring B Fig.
Page 38
Tester PX-2300M PX-2300M PX-2300M RLOOP RLOOP TxA RxB LLOOP Ring B Ring A Fig. 12-4 Loop Back Operation...
Page 40
PC port RS-232 ( DB9 ) and Master module PX-2300M/R (RJ45) <-----------------------------------------------------> PX-2300 Signal Signal RD (in) TD (out) TD (out) RD (in) DTR (out) Ground Ground Cable # 1...
Page 41
Connection RS-485 interface between subracks with master modules PX-2300R (RJ45) PX-2300R(Subrack # x) <-----------------------------> PX-2300R(Subrack # x+1) Signal Signal XMT+ XMT+ Ground Ground XMT - XMT- RCV - RCV- RCV + RCV+ Cable # 2...
Page 42
Connection between communication card of subrack (RJ11) with master module PX2300R (RJ45) via RS-485 interface PX-2300R (RJ45) <-----------------------> Communication card (RJ11) Signal Signal XMT+ XMT - RCV + RCV - XMT + Ground Ground XMT - RCV - RCV + Cable #3...
Page 43
Copyright Meridian Technologies , Inc. * All rights reserved. Meridian Technologies reserved the right to make changes and improvements to its products without providing notice. Trademarks ◊ Windows is a registered trademark of Microsoft Corporation. ◊ PICmicro i s a registered trademark of Microchip Technologies, Inc.
Page 45
Supplier’s declaration of conformity For compliance levels 1, 2 and 3 in Australia As required by the following Notices: Radiocommunications Devices (Compliance Labelling) Notice 2003 made under section 182 of the Australian Radiocommunications Act 1992; Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under section 182 of the Australian Radiocommunications Act 1992;...
Page 46
Evidence of compliance is demonstrated by test reports to the following applicable standards. Applicable standards Standard title, number and, if applicable, number of the test report Refer enquiries to manufacturer: – Messrs Meridian Technologies Inc 700 Elmont Road ELMONT, NY 11003 United States of America...