Advertisement
Preparation
Washing symbols
Washing
Medium hot
Do not
Dry flat
temperature
ironing
tumble dry
CHECKING THE MACHINE
Never use a defective machine! In case of any
Do not wash
Hot ironing
Hang to dry
Do not bleach
failure, first unplug the machine and turn off the
water
tap.
Luke warm ironing
Do not iron
Drip dry
Handy to bleach
WATER CONNECTION
Dispenser drawer
Turn on the water tap
A
Main Wash
Softener
C
Pre Wash
B
HANG UP WASTE WATER HOSE
For very dirty clothes fill 1/4 of the
Do not exceed the MAX-Level.
For normal dirty clothes use a small
portion of detergent in here and
Highly densed softeners are to
amount of detergent. Don't pre wash.
Hose elbow connection e.g. attach to water tap
select a prewashing programm
Mount the level plate to use fluid detergents.
be diluted with some water.
Washing program table
INSERT PLUS INTO THE MAINS SOCKET
Never touch the plug with wet hands!
Water Temp.
Never remove the plug from the
Fabric Type
Program
Option
Maximum Load
(Option)
socket by pulling on the cord.
Color fast garments (shirts,
60°C
- Time Delay
nightdresses, pajamas...)and
(Cold, 30°C,
- Steam Wash
Cotton
Rating
DOING LAUNDRY AND USING MACHINE
lightly soiled white cotton
40°C, 95°C)
- Intensive
(underwear)
WITH CARE
- Soak
Cotton
Lightly soiled clothing and
40°C (Cold,
- Pre Wash
Less than 7 kg
- empty all pockets
small loads
Quick
30°C, 60°C)
- Crease Care
- remove all metal parts
40°C (Cold,
- Rinse+Spin
Polyamide, Acrylic, Polyester
- place the delicate textiles into the laundry net
Synthetic
30°C, 60°C)
- Medic Rinse
- close zippers
60°C
Baby Care
Lightly soiled baby wear
(40°C, 95°C)
Less than 4.5kg
- Time Delay
LAUNDRY WITH DIFFERENT AMOUNTS OF
- Steam Default
SOILING
Allergy
Cotton, underwear, pillow
- Intensive
covers, bed sheets,
60°C
Care
- Crease Care
- wash new textiles separately
baby wear
- Rinse+Spin
lightly
- do not prewash
- Medic Rinse
- pretreat dirty spots
Delicate laundry easily
30°C
heavily
Less than 3.0kg
- pre wash
Delicate
damaged
(Cold, 40°C)
- Time Delay
Hand Wash
"Hand wash" marked delicate
40°C
- Intensive
and wool laundry
(Cold, 30°C)
/Wool
- Crease Care
WATER TREATMENT
Less than 2.0kg
Colored laundry which is lightly
30°C
- Rinse+Spin
Quick 30
- with hardness III water
soiled fast
(Cold, 40°C)
- use water softening agent
Cotton mixed, Polyester mixed
No Choose
- Steam Default
Refresh
Dress shirts, blouses
Water Temperature: Select water temperature to suit wash cycles. Always follow garment manufacture's care label or instructions when washing.
Intensive: If the laundry is heavily soiled "Intensive" option is effective.
DRUM CARE
- remove extraneous objects
Set program at "Cotton 60°C + Steam Wash + Intensive" option for test in accordance or in conformity with EN60456 and IEC60456.
- leave door open to dry the drum
Pre Wash: If the laundry is heavily soiled, "Pre Wash" Cotton is recommended. Pre Wash is available in the Cotton, Cotton Quick, Synthetic and Baby Care program.
- check the rubber seals regularly
Crease Care: If you want to prevent creasing, select Crease Care option.
Medic Rinse: For best results or for cleaner rinsing, you can choose Medic Rinse option. Medic Rinse is set by default in the Baby Care program.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the products are
ECOLOGICAL WASHING
washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M0708.
- make use of the max. washing quantity
- do not "pre wash" if possible
Notes
- use short program if possible
Neutral detergent is recommended. The wool cycle features gentle tumbling and low-speed spin for garment care.
Warning: Keep all washing powder and detergents away from children. Danger of poisoning
Sort the laundry
1
note washing instruction symbols -
Degree of soiling -
Type of textile / colour -
Fill the drum
Check the folds of the flexible gasket (grey) -
and remove any small articles, if any. .
Check inside of the drum and remove -
2
any left in items for next wash cycle. .
Remove any clothing or items on the flexible gasket -
to prevent clothing and the gasket damages .
Dispenser
drawer
B
Fill detergent
3
Refer to the
Drum
written information
A
C
on the detergent's packing
Turn the machine ON
Cover cap
by pressing the Power button
Select a
Program
Note:
To use programs in the
Steam-Cycle, please press
first the "Steam Wash" button
Select the
Pre Wash
(see additional programs).
Spinning speed
Soak
Rinse + Spin
Pre Wash
Crease care
3 items
Pre Wash
Soak
Select an Option
Pre Wash
Soak
Rinse++ Hold
Soak
Pre Wash / Soak / Crease Care / Rinse + Spin
Normal + Hold
Rinse + Spin
Rinse ++
Rinse + Spin
Rinse +
Crease care
Rinse + Spin
Crease care
Normal
Crease care
95°C
Rinse++ Hold
Rinse + + Hold
Select Rinse mode
60
Normal + Hold
Rinse + + Hold
Normal + Hold
and Washing temperature
Rinse ++
40
Rinse +
Rinse ++
30
Normal + Hold
Normal
Cold
Rinse ++
Rinse +
Rinse +
Normal
95°C
60
4 additional programs
Normal
40
Time Delay / Steam Wash / Intensive / Medic Rinse
30
95°C
Cold
95°C
60
60
40
40
30
30
Cold
Additional programs
Display
Spinning cycle
Steam Cycle
Additional programs
Time Delay
Setting "Time Delay" determines when machine stops.
How to set "Time Delay"
- Press Power button.
- Turn the Program dial to select the program you require.
Control panel
- Press Time Delay button and set time required.
- Press the Start/Pause button.
Intensive
If the laundry is heavily soiled "Intensive"option is effective.
Power button
Program Cycle
Start / Pause
Options
Temperature
- By selecting the Intensive option, the washing duration may be extended,
Rinse
depending on the program selected.
- To use this option, press the intensive button once before the wash program is started.
Medic Rinse
Turn off tap
For best results or for cleaner rinsing, select the "Medic Rinse" option.
- Close water supply
Available in the Cotton, Cotton Quick, Synthetic, Allergy Care and Baby Care programs.
- Clean the machine
Medic Rinse is set by default in the Baby Care program.
- Unplug machine
The respective temperature indicator will light up.
Steam Washing and Refresh cycle
Refresh
Additional Steps
- Turn the machine off
- Leave door open to
allow drum to dry
Steam Wash is
- For heavily stained clothes, underwear, or baby clothes.
- Steam Wash is available with the Cotton, Cotton Quick, Synthetic, Baby Care, Allergy Care programs.
- Refresh cycle is always Steam wash.
Remove laundry
- Do not load delicates such as wool, silk, and easily discolored clothes.
- Open the door
Program
- Remove the laundry
Cotton
Cotton Quick
Synthetic
How to use Refresh Cycle
1
Press Start / Pause
to start the washing process
Select the Refresh
program
Child Lock
Select this function to lock the buttons on the control panel and to prevent tampering.
Change to the desired program, whilst in child lock mode:
6 3 sec.
6 3 sec.
6 3 sec.
1
2
To activate:
To deactivate:
Press and hold
Press
press and hold
press and hold
the Option buttons
Start/Pause
the Option buttons
the Option buttons
simultaneously
simultaneously
simultaneously
TUB CLEAN is special cycle to clean the inside of the washing machine.
Tub Clean
A higher water level is used in this cyle at higher spin speed.
Perform this cycle regularly.
6 3 sec.
H
ow to use washer
1
2
3
4
2. Steam Wash
3. Intensive
Empty the drum
• If the laundry is heavily soiled "Intensive"
Add anti-limescale
Power ON with
Press the
option is effective.
completly and close
(Calgon) to the main
Then press and
Start/ Pause
• By selecting the Intensive option, the wash
the door
wash compartment.
hold Rinse and
button to start Tub
time may be extended, depending on the
Allergy Care
Baby Care
Cotton
Cotton Quick
Synthetic
Close the disp. drawer
Temp. button
Clean process
program selected.
• To use this option, press the intensive button
Steam Washing features enhance washing performance with low
once before the wash program is started.
energy consumption. Refresh cycle reduces creases in clothes.
By pressing the Steam Wash button, Steam
Changing the language
4. Medic Rinse
Function Can be selected.
By pressing the Steam Wash button, Steam Function can be selected.
When Steam Function is selected, Steam wash
• For high effectiveness or more purity in rinse
When Steam Function is selected, Steam wash (
(
) LED lights up.
) LED lights on.
operation you can choose Medic Rinse option.
Steam Wash is
• Available in Cotton, Synthetic and Baby Care
6 3 sec.
• For tough stained clothes, underwear, or baby
program.
clothes.
• Medic Rinse is default in Baby Care program.
1
The required temperature lamp will light up for
2
3
4
• Steam Wash is available with Cotton, Synthetic,
Baby Care program.
identification.
Refresh cycle is fixed Steam wash.
Refresh
Program
Temperature
Cotton
60°c (30°c, 40°c, 95°c)
Turn on machine
� Refresh cycle
Press and hold the
Display shows the
Select your
Temperature
Program
Temperature
Synthetic
40°c (30°c, 60°c)
by pressing the
• For slightly wrinkled clothes which have
buttons simultane-
different languages
language
Baby Care
95°c (40°c, 60°c)
Cold, 30°C, 40°C, 60°C, 95°C
Baby Care
40°C, 60°C, 95°C
power button
been stored for an extended time.
ously for 3 seconds
• This option features upgraded washing
It just makes wrinkled clothes easy to iron
Cold, 30°C, 40°C, 60°C
Refresh
No choose
performance with low energy.
(Do not load wet clothes).
• Do not load delicates such as wool, silk, and
• Wrinkles will be reduced.
Cold, 30°C, 40°C, 60°C
Allergy Care
60°C
easily discolored clothes.
Beep on / off
� How to use Refresh cycle
1. Turn on the washer and select the Refresh program.
NOTE:
2. Load 3 items or less and close the door.
- Steam wash is a highly concentrated and
3. Press the Steam Wash button repeatedly until
efficient.
Press the
the desired and correct number of items is
The Beep on/off function can be set by pressing and
It may seem there is no water inside the
displayed. Initial display is 2 items
2
3
4
Start/Pause
holding the Option and Rinse button simultaneously.
drum(normal condition).
- During the steam cycle the strong steam
button
The Beep on/off function can be set at any time and it is
spray may not be seen through the door
(normal condition).
automatically cancelled in the event of a power cut.
Load 3 items or less
Press the Steam Wash button repeatedly until the
- During the steam operation, a spraying sound
The Beep on/off function also works when power is off.
and close the door
required and correct number of items is displayed
will be heard. (normal condition)
- Do not try to open the door while operating.
Press the
Steam Wash button
Steam can cause severe burns.
Cleaning and Maintenance
Warning: Before cleaning the washing machine interior, unplug the electrical power cord to avoid the risk of electric shock.
Cleaning the water inlet filter
Select the desired
press
1
2
3
4
5
program
Start/Pause
Turn off the water
Unscrew the water
Pull out the water
Clean the filter using
Tighten up the inlet
tap
inlet hose
inlet filter
a hard bristle brush
hose
Cleaning the drain pump filter
5
1
2
3
4
5
After the cycle is
complete, leave the
Open the lower cover
Unplug the drain plug.
Remove any
After cleaning, turn
Close the lower
door open to dry
cap. Drain plug to
Then open the filter
extraneous matter
the pump filter and
cover cap
pull out the hose
by turning to the left
from the pump filter
insert the drain plug
Cleaning the dispenser drawer
5
Once you
have finished
1
2
3
4
cleaning, replace
5
the drawer and
run a rinse cycle
without laundry.
Pull out the
Clean the dispenser
Clean inside the
Insert the dispenser
Acknowledge your
dispenser drawer
drawer under flow-
recess with an old
drawer
selection
ing water
toothbrush
Cleaning in general
Important: Do not use methylated spirits, solvents or similar products.
Exterior
Interior
Proper care of your washing machine can extend its service life. The
Dry around the washing machine door
outside of the machine can be cleaned with warm water and a neutral
opening, flexible gasket and door glass.
non-abrasive household detergent. Immediately wipe off any spillage.
Run washing machine through a complete
Wipe with damp cloth. Avoid striking the surface with sharp objects. Never
cycle using hot water. Repeat process if
hose down the machine!
necessary.
Advertisement
