Saving A Name With A Number - Kyocera QCP 860 User Manual

Saving a name with a number

You can enter any combination of letters, numbers, and punctuation marks
in the Enter Name: screen. (To open this screen, see page 25.)
Press the key with the letter or number you want. Press the key once for
1.
the first letter, twice for the second letter, and so on.
After you have cycled through the letters, the key number appears. For
example, if you press
four times, the number 2 appears. Two seconds after you choose a
character, the cursor moves one space to the right.
To move the cursor manually, press
To delete characters, press
Tip—Press
To change cases
By default, letters start out in upper case. You can "shift" from upper case to
lower case in two ways when [A->a] or [a->A] appears on the screen above
s or
User's Guide for the QCP 860, 1960, and 2760 Phones
All manuals and user guides at all-guides.com
2
to enter a space between a first and last name.
.
twice, the letter B appears. If you press it
or
.
C
.
27