1080 System Board - Lenovo ideapad 710S Plus Hardware Maintainence Manual

Lenovo ideapad 710S Plus-13ISK/Lenovo ideapad 710S Plus-13IKB/Lenovo ideapad 710S Plus T ouch-13IKB Lenovo ideapad 710S Plus-13ISK/Lenovo ideapad 710S Plus-13IKB/

1080 System board

For access, remove these FRUs in order:
• "1010 Base cover" on page 32
• "1020 Battery pack" on page 34
• "1030 Solid State Drive" on page 35
• "1040 PCI Express Mini Card for wireless LAN" on page 36
• "1050 Speakers and fingerprint module" on page 38
• "1060 RTC battery" on page 40
• "1070 Fan and heat sink assembly" on page 41
Figure 8. Removal steps of system board
Detach the four connectors (EDP cable connector, KB FPC connector, DC-in
connector and touchpad connector) in the directions shown by arrows 1, 2,
3 and 4. Remove the screws 5.
Lenovo ideapad 710S Plus-13ISK/
Lenovo ideapad 710S Plus-13IKB
Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
3
5
2
Lenovo ideapad 710S Plus Touch-13IKB
5
5
4
1
1
2
5
5
5
43