LG MB18AH Owner's Manual page 9

Optional Function('06 Model)
• WIRELESS REMOTE CONTROLLER
This air-conditioner is equipped with wired remote controller basically. But if you want to have the wireless
remote controller, you pay for it.
Signal transmitter
Transmits the signals to the signal receptor.
1
2
ON OFF
6
8
SET CANCEL
CAUTION : for handling the Remote Controller
• Aim at the signal receptor on the wired remote controller so as to operate.
• The remote control signal can be received at a distance of up to about 7m.
• Be sure that there are no obstructions between the remote controller and the signal
receptor.
• Do not drop or throw the remote controller.
• Do not place the remote controller in a location exposed to direct sunlight, or near the
heating unit, or any other heat source.
• Block a strong light over the signal receptor with a curtain or etc. so as to prevent the
abnormal operation. (ex:electronic quick start, ELBA, inverter type fluorescent lamp)
'06 MODEL :
AMNH09GB1A0, AMNH12GB1A0, AMNH18GB2A0, AMNH24GB2A0
1. OPERATION MODEL SELECTION BUTTON
Used to select the operation mode
2. FAN SPEED BUTTON
Used to set the desired fan speed.
3. ROOM TEMPERATUR BUTTON
Used to set desired horizontal airflow direction.
4. ON/OFF BUTTON
Operation start when this button is pressed, and
stops when the button is pressed again.
5. SET TEMPERATURE BUTTON
Used to set the temperature when the desired
temperature is obtained.
3
6. ON/OFF TIMER BUTTON
Used to set time of starting operation.
4
7. SLEEP MODE AUTO BUTTON
5
Used to set sleep mode auto operation.
8. TIME SETTING BUTTON
7
9. AIR CIRCULATION BUTTON
9
Used to circulate the room air without cooling or
heating.
10
10. TIME SET/CANCEL BUTTON
11. RESET
11
Operating Instructions
Owner's Manual 9