LG UB30 Owner's Manual page 14

Operating instructions
Function setting - Child Lock
Function Setting - Change Temp
14 Indoor Unit
1
Press button repeatedly until
the is flashing.
2
If moving to 'setup' icon area by
using button, 'setup' icon
blinks, and child lock function is
setup if pressing
that time.
3
When cancelling lock function, if moving
to 'cancel' icon by pressing
and then, pressing
function is cancelled.
4
Press button to exit.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25 seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
Repeat pressing
1
icon flash.
Press button to change.
2
❈ Converting temp value : 1~7
Press button to complete
3
and active the setting process.
Press button to exit or system
4
will automatically release without any
input after 25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
button at
button
button, child lock
button until