Motorola FXC-851L User Manual page 62

There are several access codes that are used by your phone and its SIM card. These
codes help you protect the phone against unauthorized use.
The access codes (except for the PUK codes) can be changed using the
Security Settings menu options.
Phone Password
The phone password can be set to avoid unauthorized use of the phone. The password
generally supplied with the phone is 0000. You are advised to change it before you start
using your phone.
Keep the new password secret and in a safe place, separate from the phone.
PIN
The PIN (Personal Identification Number) protects your SIM card against unauthorized
use. The PIN is usually supplied with the SIM card. When the PIN Check feature is
enabled, the PIN is needed each time the phone is powered on.
If you key in an incorrect PIN some times depends on SIM card or Country in
succession, key in the PUK and press the OK soft key.
Key in a new PIN and press the OK soft key. Key in the new PIN again and
press the OK soft key.
PUK
The PUK (Personal Unblocking Key) is required to change a blocked PIN. The PUK
may be supplied with the SIM card. If not, contact your local service provider.
If you key in an incorrect PUK some times depends on SIM card or Country in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You cannot change the PUK.
User Manual of FXC-851L version 1.1 [ENG]
Copyright 2010, Motorola Inc., All rights reserved
61