Assembly - Husky H52CH6TR9 Use And Care Manual

Assembly

1
Attaching the cabinet handle
□
Position the cabinet handle (C) over the holes on the
cabinet (B).
□
Attach with the bolts (CC) and tighten with supplied
wrench (EE) or 10mm wrench/socket.
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
There are holes to mount handle on both sides
NOTE:
of cabinet, but only one handle is provided.
3
Attaching the casters
□
Be sure the drawers are locked and lay the cabinet (B)
□
Attach 2 swivel casters (E) to the cabinet (B), on the
same side as the handle (C) and attach the other 2
swivel casters (E) to the opposite side of the cabinet (B).
Insert bolts (AA) through the washers (BB) and swivel
casters (E) into the cabinet (B).
□
D
□
Tighten all casters with supplied wrench (EE) or 12 mm
wrench/socket.
□
Return the cabinet (B) to its upright position.
B
C
CC
D
the washers (BB) and
into the cabinet (B).
2
Attaching the bottle opener
□
Position the bottle opener (F) over the holes on the
cabinet (B).
□
Attach with the screws (DD) and tighten with a
screwdriver.
CAUTION:
CAUTION:
(B)
6
Do not over tighten the screws.
B
C
Do not over tighten the bolts.
AA
BB
E
B
DD
F