Optical In Connection; Antenna Connection - LG HT935TAW Owner's Manual

 Installation

OPTICAL In connection

Connect an optical output of Unit (or Digital
Device etc) to the OPTICAL IN connector.
OPTICAL IN Connection
3
To the digital
optical output jack
of your component
Home theater speaker ez setup
Listen to sound from TV, DVD and Digital
Device with 5.1(2.1 or 2)ch mode. Even in
power off mode, if you press OPTICAL, then
power is on and automatically changed to AUX
OPT mode.
1. Connect the unit's OPTICAL IN jack to jack
on optical out of your TV (or Digital Device
etc.).
2. Select the AUX OPT by using the OPTICAL.
To select the AUX OPT directly
3. Listen sound with 5.1(2.1 or 2)ch speaker.
4. To escape from AUX OPT by using the
OPTICAL.
Function is retuned to previous one.
HT905TAW-AL_DARELLK_ENG_6929.ind24 24

Antenna Connection

Connect the supplied FM/AM antenna for
listening to the radio.
Connect the AM Loop antenna to the AM
antenna connector.
Connect the FM Wire antenna to the FM
antenna connector.
Antenna Connection
NOTE
• To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
• Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
as horizontal as possible.
2010-04-26 ¿ÀÈÄ 3:20:49