Mercedes-Benz GLC Owner's Manual page 216

Charging the high-voltage battery (PLUG-IN HYBRID vehicles)
Reset the building's circuit breaker. Other-
wise, the charging process cannot be contin-
ued.
General information on the charging
process
Observe the "Important safety notes"
( page 210).
Y
The vehicle socket is located in the rear
bumper on the right below the tail lamp.
The charge socket flap and the vehicle are
centrally locked or unlocked simultaneously.
Charging the high-voltage battery via
the mains socket
Charging cable for mains sockets
Important safety notes
! Only use the charging cable to charge the
high-voltage battery. Do not use the charg-
ing cable for other purposes. It may other-
wise be damaged.
The vehicle is supplied with a charging cable
for connection to a mains socket. Only use
the charging cable supplied with the vehicle
or a charging cable approved for the vehicle.
i The charging process can vary depending
on the mains power supply. Therefore,
always observe the local information.
i
For short charge times (charging with 16
A), connect the fast-charging cable to the
wallbox or charging station. You can also
use the optionally available charging cable
with the CE plug.
Information about charging from a wallbox
can be found at ( page 216).
Y
Information about charging at a charging sta-
tion can be found at (
Stowing the charging cable
The charging cable can be stowed in the bag
supplied in the luggage compartment of the
page 217).
Y
vehicle and held in place with the Velcro fas-
tener.
Controls on the charging cable
Alternating current status indicator
:
Control/protection system indicator
;
Charge current indicator
=
Charge current setting button
?
When displays : and ; on the charging
cable light up, this means the following:
Display : :
Lights up The external mains supply
green connection is working prop-
erly. The high-voltage bat-
tery can be charged.
Flashes red A fault has been detected in
the external mains supply.
The high-voltage battery is
recharged as soon as the
electricity signal registers
normal values.
Lights up red There is a malfunction. The
charging cable must be
removed from the mains
socket and then re-inserted.
213
Z