Table of Contents
Advertisement
FLASH LVL
AUTO SHTR
46
Customizing Your Camcorder
Note that these settings will not function with external flashes that do not support
the following settings.
HIGH
To make the flash (optional) level higher than normal.
GNORMAL
To use the normal setting.
LOW
To make the flash (optional) level lower than normal.
Note
b
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
GON
Select to automatically activate the electronic shutter to adjust the
shutter speed when recording in bright conditions.
OFF
Select when recording without using the electronic shutter.
Advertisement
Table of Contents
