Table of Contents
Advertisement
2. Press
.
• The indicators
and
• The indicator
• The display shows the current
setting: e.g.
3. Press
repeatedly to change the
setting.
4. Press the on/off button to confirm
the setting.
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
start flashing and the
display is blank.
2. Press
.
• The indicators
and
• The indicator
flash.
• The display shows the current
setting: e.g.
– The levels of rinse aid range
from 0A to 6A where level 0A
means rinse aid is not used.
3. Press
repeatedly to change the
setting.
4. Press on/off to confirm the setting.
,
,
,
are off.
still flashes.
= level 5.
and
until
,
,
,
,
,
,
,
are off.
continues to
= level 4.
6.4 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets
only, it is possible to deactivate the
notification for refilling rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse
aid empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
and
start flashing and the
display is blank.
2. Press
.
• The indicators
and
• The indicator
• The display shows the current
setting:
= the rinse aid empty
notification is activated (factory
setting).
3. Press
to change the setting.
= the rinse aid empty notification is
deactivated.
4. Press on/off to confirm the setting.
6.5 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
ENGLISH
11
and
until
,
,
,
,
,
,
,
are off.
still flashes.
Advertisement
Table of Contents
