Table of Contents
Advertisement
Creating a RAID set
1.
In the main Intel
Create RAID Volume using the up/down arrow key then press <Enter>.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
2.
When the RAID Level item is highlighted, use the up/down arrow key to
select the RAID set that you want to create.
When more than two HDDs are installed in your computer, the Disks item
will be selectable. Then users can select the HDD that you want to belong
to the RAID set. Please be noticed that selecting a wrong disk will result in
losing the original data of the HDD.
3.
Key in the RAID volume capacity. Use the up/down arrow to choose the
Capacity. The default value indicates the maximum capacity using the
selected disks. Entering a lower capacity allows you to create a second
volume on these disks.
®
Rapid Storage Technology RAID BIOS menu, highlight
[
Main Menu
[ CREATE VOLUME MENU ]
Name: Volume0
RAID Level:
RAID0(Stripe)
Disks:
Select Disks
Strip Size: 128KB
Capacity: 931.5 GB
Create Volume
[ CREATE VOLUME MENU ]
Name: Volume0
RAID Level:
RAID1(Mirror)
Disks:
Select Disks
Strip Size:
N/A
Capacity: 465.8 GB
Create Volume
[ CREATE VOLUME MENU ]
Name: Volume0
RAID Level: RAID0(Stripe)
Disks:
Select Disks
Strip Size:
128KB
Capacity: 931.5 GB
Create Volume
[ CREATE VOLUME MENU ]
Name: Volume0
RAID Level: RAID0(Stripe)
Disks:
Select Disks
Strip Size: 128KB
Capacity:
931.5
GB
Create Volume
Z97M-PK USER MANUAL
]
4. Recovery Volume Options
5. Acceleration Options
6. Exit
71
Advertisement
Table of Contents
