Samsung PM43F User Manual page 69

Chapter 5. Menu
System ▼
2nd 3rd
Change PIN
Security Safety Lock
Button Lock
USB Auto Play Lock
Mobile Connection Lock
Touch Control Lock
Remote Management
General Smart Security
Anynet+ (HDMI-CEC)
HDMI Hot Plug
Description
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in
• Default password: 0 - 0 - 0 - 0
• Enter your 4 digit PIN number and press
If you want to change the PIN number, use the
All the menus and buttons of the product and remote control, except for the
be locked by the Safety Lock function.
To unlock the menus and buttons, press any button and then enter the password (default password: 0 - 0 - 0 - 0).
Turn on Power On Button to enable the remote control's Power button to turn on the device while
enabled.
This menu can be used to lock the button on the product.
Only the remote control can control the product if
Select whether to automatically play MagicInfo
• Connecting a USB device containing
Restrict other devices on your network, such as smart phones and tablets, to share content with your signage.
Prevent touch gestures from controlling your device.
You can Allow or Deny external commands to access your device via a network.
• The changed setting remains even after the product is turned off and on using the Panel key or Power switch.
This function protects all the external devices connected to the TV from hackers, spywares, and viruses.
Refer to Anynet+ (HDMI-CEC) on page 69.
This feature is used to activate the time delay to turn on a DVI/HDMI source device.
Enter New PIN. Reenter the same 4 digits in
. The default PIN number is "0-0-0-0".
Change PIN function.
Button Lock is set to On.
content saved on a connected USB device.
MagicInfo content displays "USB Auto Play Lock:
69
Confirm New PIN.
button on the remote control, will
LOCK
Safety Lock is
On." for five seconds.