Frothing Milk - Philips EP4010 User Manual

Frothing milk

2 Pour one measuring scoop of pre-ground coffee into the pre-ground
coffee compartment and close the lid.
Caution: Do not put any other substance than pre-ground coffee in the
pre-ground coffee compartment, as this may damage the machine.
3 Place a cup under the coffee dispensing spout.
4 Press the AROMA STRENGTH button and select the pre-ground coffee
brewing function.
5 Press the ESPRESSO button.
The machine automatically starts brewing the selected beverage.
Note: With pre-ground coffee you can only brew one coffee at a time.
Warning: Danger of scalding! Dispensing may be preceded by
small jets of hot water. Use the appropriate protective handle
only.
Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a
protein content of at least 3% to ensure an optimal frothing result. You can
use whole milk or semi-skimmed milk. It is also possible to use skimmed
milk, soy milk and lactose-free milk.
Note: We advise you to rinse the water circuit before use. Press the
STEAM/WATER button to dispense steam for a few seconds.
1 Fill 1/3 of a jug with cold milk.
2 Insert the classic milk frother into the milk.
3 Press the STEAM/WATER button.
-
The display shows HOT WATER.
4 Press the down button to select STEAM.
5 Press the OK button to confirm.
-
The machine starts dispensing steam.
6 Froth the milk by gently swirling the jug and moving it up and down.
7 Press the OK button to stop frothing.
English
11