Table of Contents
Advertisement
The ACA-E5 supports one optional radio module. The SIM radio
tuner module is field installable.
Before installing the module, turn off the power to the controller
and disconnect the power cord from the wall socket.
To install the module, locate the plain metal plate on the back
of the ACA-E5 located in the top right corner. Remove the two
Phillips head screws holding the plate in place. Remove the
plate.
ACA-E5 rear panel location of module installation
Russound SIRIUS Radio Module Installation Manual
Unwrap the SIM module. Locate the SIRIUS ID number sticker
on the module and write down the 12-character number as it
will be required during the activation process.
Grasp the two spring knobs and position the module in
between the two rails on each side of the controller's module
cavity. Push the module toward the back of the cavity, keeping it
moving straight between the rails.
There will be resistance when the module's pins meet the
controller's connectors. Carefully push the module into the
connector until contact is made. Tighten the thumb screws to
hold the module in place.
Spring knob
MODULE INSTALLATION
Connector pins
SIRIUS antenna connection
11
Advertisement
Table of Contents
