Warnings - Pulse XL Pro Quick Start Manual

WARNING S
TEST YOUR OUTLET
FOR OWNERS OF THE PULSE X1 AND PULSE EQ-X1
Please use the outlet tester provided with Pulse X1 or Pulse EQ-X1 it to test the outlet
where you will plug in your new machine.
Watch our instructional video at
SPARK GAP ALERT
FOR OWNERS OF THE PULSE X, PULSE X1, AND ALL PULSE EQUINE MACHINES
Please be aware that your newly purchased machine features our next-generation
spark gap, which is controlled by the intensity knob on top of the unit.
The intensity knob on mechanical (spark gap) Pulse PEMF machines such as the Pulse
X, Pulse X1 or any Pulse Equine unit are built with a SOFT STOP. For this reason, please
exercise caution when turning the dial and
OVERTURN THE KNOB.
in internal part failure due to user error that is not covered by your warranty.
Watch a demonstration at
ATTENTION:
counterclockwise until it stops (REMEMBER SOFT STOP!) to ensure the spark gap is
closed and avoid a strong pulse.
SURGE PROTECTORS & VOLTAGE
To protect your Pulse PEMF investment f rom unexpected power surges
or faulty wiring, our engineers suggest plugging the machine into a surge
protector rated for 15 amps, 125 volts, and a minimum of 900 joules.
In addition, please review the chart below to determine the voltage
and breaker size required for your machine
Watch video here:
6
PULSE CENTERS | (770) 334-2226 | support@pulsecenters.com | 34 Center Rd SE , Cartersville, GA 30121
vimeo.com/539829367
Forcing the intensity knob past the SOFT STOP may result
youtu.be/9t1gevJkymQ
Before starting or resuming a session, please turn the intensity knob
https://vimeo.com/539829577
DO NOT USE EXCESSIVE FORCE OR