Table of Contents
Advertisement
Notices
© Agilent Technologies, Inc. 2006
No part of this manual may be reproduced in
any form or by any means (including elec-
tronic storage and retrieval or translation
into a foreign language) without prior agree-
ment and written consent from Agilent
Technologies, Inc. as governed by United
States and international copyright laws.
Manual Part Number
08491-90077
Edition
Fourth edition, January 2006
Printed in Malaysia
Agilent Technologies, Inc.
Phase 3 Bayan Lepas Free Industrial Zone
Bayan Lepas, Penang 11900 Malaysia
Certification
Agilent Technologies certifies that this prod-
uct met its published specifications at the
time of shipment from the factory. Agilent
Technologies further certifies that its cali-
bration measurements are traceable to the
United States National Institute of Stan-
dards and Technology (NIST, formerly NBS),
to the extend allowed by the Institute's cali-
bration facility, and to the calibration facili-
ties of the other International Standards
Organization members.
Warranty
The material contained in this document is
provided "as is," and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted
by applicable law, Agilent disclaims all war-
ranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection
with the furnishing, use, or performance of
Notices
this document or of any information con-
tained herein. Should Agilent and the user
have a separate written agreement with
warranty terms covering the material in this
document that conflict with these terms,
the warranty terms in the separate agree-
ment shall control.
Limitation of Warranty The foregoing war-
ranty shall not apply to defects resulting
from the improper or inadequate mainte-
nance by the Buyer, Buyer-supplied soft-
ware or interfacing, unauthorized
modification or misuse, operation outside of
the environmental specifications for the
product, or improper site preparation or
maintenance.
NO OTHER WARRANTY IS EXPRESSED OR
IMPLIED. AGILENT SPECIFICALLY DIS-
CLAIMS THE IMPLIED WARRANTIES OR
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
Exclusive Remedies THE REMEDIES PRO-
VIDED HEREIN ARE THE BUYER'S SOLE
AND EXCLUSIVE REMEDIES. AGILENT
SHALL NOT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CON-
SEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, TORT, OR ANY
OTHER LEGAL THEORY.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accor-
dance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or subcon-
tract, Software is delivered and licensed as
"Commercial computer software" as
defined in DFAR 252.227-7014 (June 1995),
or as a "commercial item" as defined in FAR
2.101(a) or as "Restricted computer soft-
ware" as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation
orcontract clause. Use, duplication or dis-
closure of Software is subject to Agilent
ii
Technologies' standard commercial license
terms, and non-DOD Departments and
Agencies of the U.S. Government will
receive no greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive
no greater than Limited Rights as defined in
FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a hazard. It calls
attention to an operating procedure, prac-
tice, or the like that, if not correctly per-
formed or adhered to, could result in
damage to the product or loss of important
data. Do not proceed beyond a CAUTION
notice until the indicated conditions are
fully understood and met.
WARNING
A WARNING notice denotes a hazard. It
calls attention to an operating procedure,
practice, or the like that, if not correctly per-
formed or adhered to, could result in per-
sonal injury or death. Do not proceed
beyond a WARNING notice until the indi-
cated conditions are fully understood and
met.
849x and 1158x Operating and Service Manual
Advertisement
Table of Contents
