Advertisement
Quick Links
PCT60 Pro Cable Tester
Congartulations!
The PCT60 accepts a wide range of cable types used in variety of A/V applications
such as XLR (3 and 5-pin), 1/4" and 1/8" TS, TRS, and TT plugs as well as RCA,
MIDI, Speakon (8-P, 4-P), Din 4-P, RJ45, and USB. Choose to either test continuity or
send out test tones. Output level is adjustable between +4dBu pro line level, -10dBV
consumer line level, and -50 mic level. The PCT60 can check for continuity, intermit-
tency, phantom power, and the presence of grounded shields. The unit runs off two
AA 1.5V batteries makinWWg it easy to carry around whether working in the field or at
home.
www.PyleAudio.com
Advertisement
Related Manuals for Pyle PCT60
Summary of Contents for Pyle PCT60
- Page 1 PCT60 Pro Cable Tester Congartulations! The PCT60 accepts a wide range of cable types used in variety of A/V applications such as XLR (3 and 5-pin), 1/4” and 1/8” TS, TRS, and TT plugs as well as RCA, MIDI, Speakon (8-P, 4-P), Din 4-P, RJ45, and USB. Choose to either test continuity or send out test tones.
- Page 2 Installing the battery Locate the small screw for the battery cover plate on the back of the unit Using a small Phillips head screwdriver, rotate the small screw counter clockwise. Remove the plate. Insert the two AA batteries with the correct polarity. Reattach battery cover plate, insert screw and turn clockwise to tighten.
- Page 3 Intermittent Connections To test for broken connections While in test mode with a cable plugged into both an In and Out, press the reset button to clear the Intermittent LED’s. Next, move the suspected cable end around vigorously while plugged in. If there are any shorted, loose, or broken connections, one of the Intermit- tent LED’s will light up showing where the break is taking place.
- Page 4 Test Tone Mode To send out a test tone, select Test Tone Mode. Plug the cable into one of the Cable Out’s. Press the Reset button to toggle between a 1kHz and 440Hz tone. You can adjust the signal strength to the appropriate level for testing by adjusting the Test Tone Level selector between -50 (Mic level), -10dBV (Consumer Line Level), and +4dBu (Pro Line Level).
- Page 5 Largest Supplier of Electrical and Electronic Components Click to view similar products for manufacturer: pyle Other Similar products are found below : PDS442 PSPVC6 PDWM4300 PDWM4400 PDMW6 PDBT28 PDJSD2 PLRSTND10 PLG3.2 PSCRIM2B PSCRIM2W PDWM2115 PDWM1904 PSTND1 PPA15 PPA10 PDS341 PDS122 PDMW5 PLAM40 PFN41 PCT40 PPA6 PDMR6 PPA8 PDS221...