Using Sample Programs - Contec DIO-1616H-PE User Manual

5. About Software

Using Sample Programs

Sample programs have been prepared for specific basic applications.
For the API-DIO(WDM), The sample programs are stored in
\Program Files\CONTEC\API-PAC(W32)\DIOWDM\Sample
Use these sample programs as references for program development and operation check.
* When the installation folder is changed, the folder of the sample program is different.
Running a Sample Program
(1) Click on the [Start] button on the Windows taskbar.
(2) For the API-DIO(WDM), from the Start Menu, select "Programs" – "CONTEC API-PAC(W32)" –
"API-DIO(WDM)" – "SAMPLE...".
(3) A sample program is invoked.
Sample list
Simple I/O
Multiple port/bit I/O ports/bits : Simultaneously executes digital I/O processing of multiple
Monitoring Trigger
Interrupt
Sampling *1
Infinite Sampling *1
Generating *1
Sync Sampling *1
*1: This sample can only be used on devices that are equipped with a bus master transfer function.
44
: Executes digital I/O processing of the specified port.
: Monitors rising-edge/falling-edge triggers.
: Executes interrupt processing of the specified board.
: Executes pattern input (sampling) in 32bits.
Saves sampling data to a file.
: Executes pattern input (sampling) in 32bits infinitely.
Saves sampling data to a file.
: Executes pattern output (generating) in 32bits.
: Executes synchronous operation of the two boards connected to
each other via a synchronization control connector.
DIO-1616H-PE, DIO-3232H-PE