How To Use The Main Menu; Tuning In Tv Stations Automatically - LG V192H Owner's Manual

Before Operation-VCR part

How to use the main menu

This DVD+VCR can easily be programmed by using the
menus displayed on screen.
The menus are controlled by the Remote Control
Handset.
1. Switch on your TV set and DVD+VCR by pressing the
POWER button.
2. Press i button.
The main menu will appear on the TV screen.
1 2
SET
f
OSD OSD
ON
OFF
REC - Timer recording setting (see p. 23).
PR SET - Manual tuning setting (see p. 15).
ACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
SET - Date & clock setting (see p. 13).
SYS - To set the Colour TV System (see p. 13).
1 W ON/OFF - Power Save Mode (see p. 26).
(Dr.) - To check a problem with your VCR
(see p. 26).
F.OSD ON/OFF - To display the operational
mode of your VCR
(see p. 25).
(16:9/4:3) - To select the aspect ratio of your
TV (see p. 26).
DECODER - To use a pay-TV decoder
(or Satellite) with your VCR
(see p. 25).
(OPR) - To improve the playback picture
(see p. 21).
Appear when playback only.
Tip
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 18.)
3. Press 1 and 2 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
4. Press i to return to a TV picture.
14
SYS

Tuning in TV Stations Automatically

If the TV broadcast signal is weak your DVD+VCR may
not detect the necessary information and will not be
able to store them correctly. To overcome this problem
please turn to the MANUAL TUNING section on page
15.
1. Press POWER to turn on your DVD+VCR.
2. Press i button.
The main menu will appear on the TV screen.
Press 1 or 2 to select the ACMS.
Press ENTER/OK.
1 2
Pr-12
SET
SYS
ACMS
Pr-12
ACMS
f
OSD OSD
ON
OK i
OFF
3. Press OK to again to start the automatic tuning
process.
01 C02
02 C03
03 C04
S
Pr-12
ACMS
4. The TV STATION TABLE will appear when tuning is
completed.
Press i to save your settings.
01 C02
02 C03
03 C04
04 C05
05 C06
06 - -
07 - -
08 - -
P SET
R
Notes:
Please note currently only a limited number of TV
companies transmit the Programme Delivery Control
(PDC) signal which enables your DVD+VCR to
successfully identify and store them. If your DVD+VCR
has difficulty in identifying a TV station please turn the
page to find out how to manually tune in and name a TV
station. While automatic tuning is taking place the time
and date will set automatically.
If - - :- - appears in the DVD+VCR display it means that
the broadcast signal is weak and the clock was not set.
Please turn to CLOCK SET section of this book on
page 13.
ACMS
Pr-12
OK i
ACMS
00 BBC1
00 BBC2
00 ITV
E
i
00 BBC1
00 BBC2
00 ITV
00 CH4
00 CH5
- - - - - - -
- - - - - - -
- - - - - - -
MOVE :
DELETE : ,
OK i