Sony DSR-80 Service Manual page 302

10-5-1-18. REF. Internal SCH Adjustment
Conditions for adjustment
. PB mode
100 % Color bar/XH5-1AP
. REF. VIDEO IN ; No signal
. Vector (1751) ; SCH mode
. After adjustment is completed, re-connect the REF.
VIDEO IN.
Connection 2
10-5-1-19. REF. VIDEO OUT SYNC/Burst Level Adjustment
Conditions for adjustment
. PB mode
100 % Color bar/XH5-1AP
Connection 2
10-18 (P)
Adjustment . . . . . Specification
REF. VIDEO OUT (75 Z terminated)
(A) Burst Adjustment
1PHASE control/Vector
TRIG : INT/WFM
SYNC
Spec. (A) Set the dot of the burst in the right position on the scale.
(B) The SYNC should be in the center of the bursts.
±
(SCH=0 3 d d d d d )
Adjustment . . . . . Specification
REF. VIDEO OUT (75 Z terminated)
(A) SYNC LEVEL
1RV505/IO-149 (B-4)
TRIG : INT/WFM
WFM or Oscilloscope
Spec. A, B=0.300
(B) SYNC PHASE
1RV501/IO-149 (B-4)
SCH mode
Burst
(B) BURST LEVEL
1RV506/IO-149 (A-4)
±
0.003 V
DSR-80/80P/60/60P